Tile flooring installation can be done by anyone with good eyesight (or glasses), who is physically fit enough to scrub, scrape, kneel and bend. You will need to be careful enough to handle a wet tile saw or utility knife. and patient enough to smooth the mortar evenly, but with grooves. You will need several hours, depending on the size of the floor, and if the floor is a bathroom and you have children, a second bathroom that they can use can be helpful, as it takes a couple of hours for the mortar to dry. dried.
You’ll need the tile, of course. Your choice of design is entirely up to you, but consider how the design will fit in with the rest of the room. Consider, too, the function of the room. Kitchen floors are always exposed to food and water drips. Dark ceramic tile floors would tend to make seeing these drips more difficult when you are mopping the floors. Light, solid colors are most appropriate for kitchen floors, while darker tiles with simple patterns work best in bathrooms. Compare prices at local hardware and home improvement stores or online. If you can’t find what you’re looking for in your local stores, you’re bound to find it online. You can get ceramic tiles from any country on the net. You will surely find the design you have in mind there.
Once you have your tile, you can pre-cut tiles to be placed on the edges of the floor if the tile is too large. This means that you need to do some measurements first. You can also cut the tile while you’re laying it, but then you want to make sure you haven’t set the mortar until you’ve made the necessary cuts. Mortar that is only partially dry may not adhere to the tile when installed. You can use a wet pottery saw or utility knife to make the cut. What you use depends on the thickness of your ceramic tile floor.
To lay your ceramic tile floor, you will also need mortar and grout. These are easily purchased at any hardware or home improvement store. You’ll also need a wet saw to cut tiles, when needed, and a trowel to spread the mortar or adhesive on which you’ll set the tiles. You can also use spacers that space the tiles from each other evenly.
If the floor you are covering with ceramic tile flooring is not concrete, you will first need to lay concrete or lay concrete backer boards. The floor you will be installing your ceramic tile flooring on should be as even as possible. If not, you’ll have to match it first. Repair all holes and cracks in the floor and clean it thoroughly before starting work.
Once the floor is prepared and dry, you can begin laying your ceramic tile floor. It is best to lay the tile in previously separated sections. Divide the floor into four sections. You can use grout as a line separator. Then for each section, use a notched trowel to spread the mortar. Hold the trowel at a 45 degree angle so that it notches the extension. This allows for a better hold when laying the mosaic.
Don’t spread too much mortar at once. If the mortar dries before you can set the tile, you will have the added problem of removing it. When you lay the tile, only light pressure is required. Depending on the thickness of the tile, you will need to press it into the mortar a short distance. Make sure each tile is even with the next. The mortar will run off the sides of the tile, but it can be easily cleaned up. Avoid resting your hands or arms on the tile you have laid. It will take a couple of hours before the mortar is completely dry. Apply grout to the ceramic tile floor and clean any grout left on the tiles.
Before you start, watch some free videos online to see how it’s done. Laying your own ceramic tile floor can be a very satisfying experience, especially when you realize that it’s a job well done!
